Metal Stud Insulators
|
Metal Stud Insulators | |||
 |
INSULATES COPPER OR POLYPIPE TUBING FROM SHARP EDGES OF METAL STUDS.
| ||
 ½” Pipe-Tytes Part #500-P Quantity: 100/bag |
 ¾” Pipe-Tytes Part #750-P Quantity: 100/bag |
 1” Pipe-Tytes Part #1000-P Quantity: 100/bag | |
Installs in seconds for a neat professional job: 1. Punch hole in metal stud with the ET-5 Stud Punch. 2. Place Pipetyte over the pipe and push into the hole. Will not fall out or break. Secures the pipe to the stud either before or after soldering. This feature enables the plumber to fit many pipes together and maintain accurate pipe position before soldering. 3. The patented off-center hole allows you to rotate the Pipetyte in the hole to level or add pitch to the pipe. This enables the pipe to pass by stacks, or rotate back away from drywall screws or nails.  Meets UL Standard 2043 for discrete products installed in air-handling spaces.Click here for a printable PipeTytes Insulators brochure, pdf | |||
| Pipe-Tytes, Inc.® 9050 16th Street, Vero Beach, Florida 32966 Toll-Free: 800-325-8739 Toll-Free Fax: 1-866-576-6200 Phone: 772-770-3200 Fax: 772-770-6200 [Home] [Samples & Literature] [Order Information] [Distributor Locations] [Contact Us At Pipe-Tytes ] [About Our Company] [Next Product] |